Keysight Technologies 11713D - Page 70

6 Remote Operations
70 Keysight 11713D/E Operating and Service Manual
Examples
To open all channels:
ROUTe:OPEn:ALL
Related Commands
ROUTe:CLOSe
ROUTe:OPEn
ROUTe:CLOSe:ALL
:CONFigure[:BANK1]:X/:CONFigure[:BANK1]:Y
:CONFigure:BANK2:X/:CONFigure:BANK2:Y
Set the attenuator or solid state switch type (model number) for corresponding
attenuators or solid state switches.
:CONFigure[:BANK1]:X <model>
:CONFigure[:BANK1]:Y <model>
:CONFigure:BANK2:X <model>
:CONFigure:BANK2:Y <model>
Examples
To set the attenuator or solid state switch type to KTP9400:
:CONF:BANK1:X KTP9400
To query the set attenuator or solid state switch type:
:CONFigure[:BANK1]:Y?
:CONFigure:BANK2:X?
:CONFigure:BANK2:Y?
Set Parameters
Numeric representation format: Integer (for
example, 8)
Minimum n/a
Maximum n/a
Units None
Query? Yes
Set? Yes
Set/Return Parameters
NA|KT8494| KT8495| KT8495K| KT8496|
KT8497| KT84904| KT84905| KT84906|
KT84907| KT84908 | KTP9400 | KTP9402 |
KTP9404 | KTU9400 | KTU9397
Minimum n/a
Maximum n/a
Units None