Keysight Technologies 11713D - Page 75

Remote Operations 6
Keysight 11713D/E Operating and Service Manual 75
Related Commands
:CONFigure[:BANK1]:X/:CONFigure[:BANK1]:Y
:CONFigure:BANK2:X/:CONFigure:BANK2:Y
CONFigure[:BANK1]/CONFigure:BANK2
CONFigure[:BANK1]:TTL/CONFigure:BANK2:TTL
CONFigure[:BANK1]:PULSe:DRIVe
CONFigure:BANK2:PULSe:DRIVe
CONFigure[:BANK1]:PULSe:WIDTh
CONFigure:BANK2:PULSe:WIDTh
DIAGnostic:RELay:CYCLes?
Checks number of cycles for individual section. For detailed information, refer to Rules
for using a channel or scan list section.
DIAGnostic:RELay:CYCLes? <channel_list>
Examples
To query the number of cycles:
DIAG:REL:CYCL? (@1,8)/DIAG:REL:CYCL? (@1:8)
DISPlay:ATTenuation
Turns the front panel display to the ATTEN page.
DISPlay:ATTenuation
Query? Yes, query only
Set? No
Return Parameters
Numeric representation format: Integer (for
example, 8)
Minimum
101 (11713D)
101, 201 (11713E)
Maximum
110 (11713D)
110, 210 (11713E)
Units None
Query? No
Set? Yes
Set Parameters n/a
Minimum n/a
Maximum n/a
Units None