Keysight Technologies 11713D - Page 80

6 Remote Operations
80 Keysight 11713D/E Operating and Service Manual
Related Commands
SYSTem:PREset
SYSTem:REMote
SYSTem:COMMunicate:TCPip:CONTrol?
SYSTem:PREset
Presets the switch/attenuator driver to the following factory-defined states:
- All channels in both banks will be lighted on.
SYSTem:PREset
Examples
To preset the switch/attenuator driver:
SYSTem:PREset
Related Commands
SYSTem:ERRor?
SYSTem:REMote
SYSTem:COMMunicate:TCPip:CONTrol?
SYSTem:REMote
Sets the interface in the Remote state, which disables all front panel controls except the
Local key. Pressing the Local key in the Remote state returns the front panel to the Local
state.
SYSTem:REMote
Query? No
Set? Yes
Set Parameters n/a
Minimum n/a
Maximum n/a
Units None
Query? No
Set? Yes
Set Parameters n/a
Minimum n/a
Maximum n/a
Units None