Rack Mounting
This section requires option AC68BRAC3 (for models AC6801B, AC6802B, and AC6803B)
or AC68BRAC6 (for model AC6804B).
This section contains instructions for installing the instruments in a 19-inch EIA rack.
Verification of Option Kit
Verify that you received the following items. If anything is missing, please contact your nearest
Keysight Sales and Support Office.
Rack Mounting Kit AC68BRAC3 for AC6801B, AC6802B, and AC6803B
Item Description Quantity
1 Bracket 2
2 Flat Head Screws M4×0.7×10 4
3 Clip Nuts for Rack Frame 10-32 0.5-in. 4
4 Dress Screws with Nylon Washer, Phantom Gray 4
Rack Mounting Kit AC68BRAC6 for AC6804B
Item Description Quantity
1 Bracket 2
2 Flat Head Screws M4×0.7×10 8
3 Clip Nuts for Rack Frame 10-32 0.5-in. 8
4 Dress Screws with Nylon Washer, Phantom Gray 8
Installation
Do not block the air intake at the front of the instrument or the exhaust at the rear.
To prevent the instrument from falling, install suitable support angles (not included)
to support the instrument as shown.
Keysight AC6800B Series Operating and Service Guide 25
1Getting Started
To Next Page
Loading...