Configuring Watchdog Protection
The watchdog protection feature places the output in protection mode if a SCPI command or query is
not received within the specified delay period, which may be set between 1 and 3600 seconds (factory
default 60).
Press [Menu] >Protect>WDog to configure watchdog protection. It is disabled by factory default.
SCPI:
OUTPut:PROTection:WDOG[:STATe]
OUTPut:PROTection:WDOG:DELay
2User Information
88 Keysight AC6800B Series Operating and Service Guide
To Next Page
Loading...