Each instrument ships with a default service name with the format: Keysight-modelnumber-
description-serialnumber, where modelnumber is the unit’s 7-character model number (e.g.
AC6803B), description is the description, and serialnumber is the serial number on the instrument's
label.
Services
This enables and disables LAN services.
Front Panel SCPI Command
[Menu]>System>IO>LAN>Modify>Services.
Check (enable) or uncheck (disable) services as desired.
Not available
The configurable services include: VXI-11, Telnet, Web control, Sockets, and mDNS.
You can enable or disable Web control using the Web page 'Browser Web Control' tab.
Using the Web Interface
Your instrument has a built-in Web interface that lets you control it directly from the Web browser on
your computer. With the Web interface, you can access the front panel control functions including the
LAN configuration parameters. Up to six simultaneous connections are allowed. With additional
connections, performance will be reduced.
The built-in Web interface only operates over the LAN. It requires Internet Explorer
7, Firefox, or Chrome. You also need the Java (Sun) Plug-in. This is included in the
Java Runtime Environment.
The Web interface is enabled when shipped. To launch the Web interface:
Keysight AC6800B Series Operating and Service Guide 47
1Getting Started
To Next Page
Loading...