Keysight Technologies B1500A User Manual

3- 62 Keysight B1500A User’s Guide, Edition 14
Installation
About Plug-in Modules
About Module Installation
Module installation must be carried out at a Keysight Technologies service center.
Contact Keysight Technologies for the module installation. Then send the following
equipment and accessories to Keysight Technologies.
• B1500A
• Plug-in modules to be installed
• ASU, for installing the exclusive SMU or retrofitting ASU only
• Connection cable between ASU and SMU, for installing the exclusive SMU or
retrofitting ASU only
• RSU, for installing WGFMU
• Connection cable between RSU and WGFMU, for installing WGFMU
For returning ASU or RSU, do not forget to notify the combination of the unit,
connection cable, and module channel.
WARNING To prevent electrical shock, turn the instrument off and remove the power
cable before removing the connection cables.
NOTE About B1500A which supports SPGU and WGFMU
SPGU and WGFMU are supported by the B1500A serial numbered JP40Nxxxxx and
later. The other B1500A needs the mainframe upgrade to support the module.
Contact Keysight Technologies to upgrade the B1500A.
NOTE Module locations after servicing
After the module installation, upgrade, and so on, the B1500A will be returned with
the module configuration decided by the rule shown in Table 3-12. If you want to
change the module locations, consult the service personnel before servicing.

Keysight Technologies B1500A Specifications

General

Brand	Keysight Technologies
Model	B1500A
Category	Measuring Instruments
Language	English