Keysight Technologies B1500A User Manual

2- 8 Keysight B1500A User’s Guide, Edition 14
Introduction
Front View
Front View
This section describes the front view of Keysight B1500A.
1. Standby switch
Turns the instrument on. Pressing the button in the ON state makes it in the
standby state. The green LED lights when it is in the ON state.
NOTE When turning the B1500A on
Open the measurement terminals at the device side when turning the B1500A on.
Also disconnect the device from the measurement terminals and open the
measurement terminals after the measurement. If you leave the connection with the
device, the device may be damaged by unexpected operations or charge-up of
measurement cables.
1
5
12
6
7
8
9
10
11
4
2
3

Keysight Technologies B1500A Specifications

General

Brand	Keysight Technologies
Model	B1500A
Category	Measuring Instruments
Language	English