Keysight Technologies B1500A User Manual

1- 2 Keysight B1500A User’s Guide, Edition 14
Getting Started
This chapter describes the basic operations of Keysight B1500A. Before learning
the product details, let’s try to use the B1500A briefly. The operations need the
B1500A, power cable, and USB keyboard only (USB mouse and stylus pen are
optional). Keysight B1500A also requires Keysight EasyEXPERT software as its
graphical user interface.
During the operations, you will not connect device under test. Open all
measurement terminal.
This chapter consists of the following sections.
• “To Turn On/Off B1500A”
• “To Launch EasyEXPERT”
• “To Use Tracer Test Mode”
• “To Use Application Test Mode”
• “To Use Classic Test Mode”
• “To Perform Measurement”
• “To Use Analysis Tools”
NOTE If you use the B1500A at the first time
If this is the first time to turn Keysight B1500 on after the delivery, you need to
perform the initial setup of the B1500. See “Inspection and Installation” on page
3-7. After the initial setup and if no users are added, you can automatically logon as
“Keysight B1500 User” account without password.

Keysight Technologies B1500A Specifications

General

Brand	Keysight Technologies
Model	B1500A
Category	Measuring Instruments
Language	English