Keysight Technologies InfiniiVision 1000 X-Series User Manual

Keysight InfiniiVision 1000 X-Series Oscilloscopes User's Guide 99
Index
Symbols
(-) Width measurement, 66
(+) Width measurement, 66
Numerics
10-bit write trigger, I2C, 80
A
About Oscilloscope, 89
AC channel coupling, 39
AC RMS measurement, 66
accessories, 14, 93
acquire, 56
Acquire key, 23, 35, 36
Acquisition controls, 23
acquisition memory, saving, 85
acquisition mode, 56
acquisition mode during autoscale, 89
acquisition mode, preserve during
AutoScale, 89
acquisition modes, 56
actual sample rate, 61
addition math function, 46
address size, I2C, 80
address with no ack condition, I2C
trigger, 80
aliasing, 57
aliasing, FFT, 44
altitude (environmental conditions), 92
AM (amplitude modulation), waveform
generator output, 77
Amp units, 40, 55
Amplitude measurement, 66
amplitude modulation (AM), waveform
generator output, 77
analog bus display, 41
analog channel, probe attenuation, 40
analog channel, setup, 38
analog filters, adjusting, 42
Analyze key, 24
Analyze Segments, 57
annotation, adding, 49
ASCII file format, 85
attenuation, probe, 40
attenuation, probe, external trigger, 55
auto mask creation, 67
auto range, digital voltmeter, 74
Auto Scale key, 23
Auto Setup, FFT, 42
Auto Setup, FFT (Magnitude), FFT
(Phase), 46
Auto trigger mode, 54
automatic measurements, 65
Autoscale, 19
Autoscale preferences, 88
Autoscale, undo, 19,
88
Average measurement, 66
averaging acquisition mode, 56
B
Back key, 22
bandwidth, 89
bandwidth limit, 39
bandwidth required, oscilloscope, 61
bandwidth, oscilloscope, 58
Base measurement, 66
base, UART/RS232, 83
baud rate, CAN, 79
baud rate, LIN, 81
baud rate, UART/RS232, 83
BIN file format, 85
bit order, SPI, 82
bit order, UART/RS232, 83
Bit Rate measurement, 66
Blackman Harris FFT window, 42, 46
blanking, 36
BMP file format, 84
Bode plot, frequency response
analysis, 76
brick-wall frequency response, 58
brightness of waveforms, 22
built-in help, 31
bus configuration, UART/RS232, 82
Bus key, 25, 41, 78
buttons (keys), front panel, 22
C
calibration, 89
calibration protect button, 28
CAN baud rate, 79
CAN bus trigger, 80
CAN counters, 79
CAN polarity, 79
CAN sample point, 79
CAN serial bus decode/trigger, 79
CAN signal setup, 79
cascaded math functions, 46
Center, FFT, 42
Center, FFT (Magnitude), FFT
(Phase), 46
channel labels, 49
channel, analog, 38
channel, bandwidth limit, 39
channel, coupling, 39
channel, invert, 39
channel, on/off keys, 26
channel, probe units, 40
channel, skew, 40
channel, vernier, 26
channels to be autoscaled, 88
characteristics, 91
choosing values, 23
clear display, 49
clear display, Quick Clear Display, 90
Clear measurements, 66
clear persistence, 49
clear, mask test, 67
clock, oscilloscope, 89
color printing, 87
color screen image, 84
compensate passive probes, 20, 26

Keysight Technologies InfiniiVision 1000 X-Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 1000 X-Series
Category	Test Equipment
Language	English