Keysight Technologies IntegraVision PA2201A Series

To adjust reference waveform skew
1. Press Skew and turn the [Entry] knob to adjust the reference waveform skew.
To save a reference waveform to USB
1. Press [Save/Recall]>Save>Format.
2. Turn the Entry knob to select Reference Waveform data (*.h5).
3. Press Source and turn the [Entry] knob to select the source waveform.
4. Press the second softkey and use the Entry knob to select a save location.
5. Press PresstoSave.
To recall a reference waveform
1. Press [Save/Recall]>Recall>Recall.
2. Turn the Entry knob to select Reference Waveform data (*.h5).
3. Press To Ref: and turn the [Entry] knob to select the reference waveform location.
4. Press the second softkey and use the [Entry] knob to select the file to recall.
5. Press Press to Recall.
To clear the display of everything except the reference waveform, press Clear Display.
Keysight IntegraVision PA2200 Series Power Analyzers Operating and Service Guide157