Safety Information
Safety Symbols
Alternating current
ACand/or DCcurrent
Frame or chassis terminal
Off indication. Unit is completely disconnected from AC mains power when switch is off.
On indication. Unit is connected to AC mains power and turned on.
Risk of electric shock
Refer to accompanying documents.
The CE mark indicates the instrument meets the requirements of the applicable European Com-
munity Directives to be placed on the European Community market. "ISM 1-A" indicates that
the instrument is an "Industrial, Scientific and Medical Group 1, Class A" product. The CE mark
is a registered trademark of the European Community.
The ETL mark with the 'c' and 'us' subscript indicates the instrument is certified to the applic-
able Canadian and United States of America product safety standards respectively.
CAT II 1000V IEC Measurement Category II. Inputs may be connected for the purposes of performing meas-
urements to AC mains power sources up to 1000 VAC in Measurement Category II envir-
onments. Such environments are typically within equipment that is connected to the mains by
a cord and plug, and not by a permanent connection.
The RCM mark is a registered trademark of the Spectrum Management Agency of Australia. This
signifies compliance with the Australian EMC Framework regulations under the terms of the
Radio Communications Act of 1992.
ICES-001
NMB-001
This mark indicates the instrument complies with the Canadian Interference-Causing Equip-
ment Standard for Industrial, Scientific and Medical (ISM) Radio Frequency Generators.
This equipment is Class A suitable for professional use and is for use in electromagnetic envir-
onments outside of the home.
Contains more than the maximum concentration value (MCV) of one or more of 6 specified haz-
ardous substances; 40 Year EPUP.
Keysight IntegraVision PA2200 Series Power Analyzers Operating and Service Guide5
To Next Page
Loading...
Need help?
General
