Learn the Rear Panel
The image above shows a PA2201A. The PA2203A is similar, but it has four identical power
channels, labeled 1, 2, 3, and 4.
The external current input (item 2, above) is shown on Channel1, and the internal current
shunts connector (item 3, above) is shown on Channel2. Both channels are identical on the
PA2201A, and all four channels are identical on the PA2203A. The sliders are shown in the down
position on Channel1 and in the up position on Channel2. The sliders prevent current inputs
from going into the external and internal current inputs simultaneously.
1
Connect your voltage signal here. The maximum input range is
1000V.
2
Connect a voltage signal from a current transducer here (shown on
channel 1). The maximum input range is 10 V.
Keysight IntegraVision PA2200 Series Power Analyzers Operating and Service Guide25
To Next Page
Loading...
Need help?
General
