48 Keysight M8000 Series of BER Test Solutions Installation Guide
2 Installing Modules
Detailed information, consisting of user guide and other documents, for
the M9536A or M9537A Embedded Controller module is available at:
www.keysight.com/find/M9536A
www.keysight.com/find/M9537A
The M9536A or M9537A Embedded Controller module will successfully connect
with M8030A only when installed in slot 1 of the M9514A chassis. Make sure
that you install the module in the M8030A before powering up the complete
setup.
You should not connect the M8030A to multiple operating host computers at
the same time. If you plan to use the M9536A or M9537A AXIe Embedded
Controller as the host computer, then do not connect an external host computer
to the M8030A.
To Next Page
Loading...
Need help?
General
