Keysight N9927-90001 User’s Guide 525
System Settings
SA
SA
Choose the SA setting for Individual ment Control default. See also
“Alignments” on page 180.
How to select SA defaults:
—Press System 7
—Then Preferences
—Then Preferences
— Then use arrow softkeys or the knob to select SA
—Then Edit
for each of the following:
— Individual ment Control
——On (Default - recommended)
——Off
—Then Done Edit
(after changing setting)
System Configuration
Options (Licensing)
You can view and install options on your FieldFox. To see a comprehensive list
of the options that are available, view the FieldFox Configuration Guide at:
http://literature.cdn.keysight.com/litweb/pdf/5990-9836EN.pdf
How to view the Installed Options
—Press System 7
—Then System Configuration
—Then Options (Licensing)
—Then Show Options
The currently installed options are listed.
How to Install Options
A.lic file must already be on a USB Flash Drive. To learn how to obtain a.lic file,
visit: http://www.keysight.com/find/softwarelicense
Insert the USB Flash Drive in the FieldFox.
—Press System 7
—Then System Configuration
To Next Page
Loading...
Need help?
General
