Keysight N9927-90001 User’s Guide 303
Remote Server Mode (Requires CPU2 and SA Hardware/SA Option 233)
Connecting Using Remote Server
Connecting Using Remote Server
This section provides an overview of the FieldFox’s Remote Server mode
instrument display messages that occur during the remote connection
process. For more information on specific compatible PC-based licensed
procedures refer to:
— “89600 VSA Software Overview (Requires CPU2 and N991xA/3x/A5x/A6xA
and SA Option 233)” on page 305
Figure 13-1 Initial Waiting for a Connection from a PC-based and Compatible Licensed
Software or No Remote Connection
The graphic above shows the FieldFox in the process of connecting to a
PC-based and compatible licensed software.
To Next Page
Loading...
Need help?
General
