Keysight N9000B - Exclude TX Settling Time From NRMSE Computation; Exclude TX Settling Time From Impairment Estimation; 3.4.8.5 Limits; Limit Test

3 Short-Range Comms & IoT Mode
3.4 HRP UWB Demodulation Measurement
Exclude TX Settling Time From NRMSE Computation
Sets the transmitter settling time in seconds. The samples within TX settling time
are omitted in analysis or NRMSE computation.
Remote Command
[:SENSe]:HUWB:TX:STIMe[:EFNRmse] <time>
[:SENSe]:HUWB:TX:STIMe[:EFNRmse]?
Example
:HUWB:TX:STIM 1us
:HUWB:TX:STIM?
Preset 0s
State Saved Yes
Min 0s
Max 1s
Exclude TX Settling Time From Impairment Estimation
Sets the transmitter settling time in seconds. The samples within TX settling time
are omitted in impairment estimation.
Remote
Command
[:SENSe]:HUWB:TX:STIMe:EFIMpairment <time>
[:SENSe]:HUWB:TX:STIMe:EFIMpairment?
Example
:HUWB:TX:STIM:EFIM 15us
:HUWB:TX:STIM:EFIM?
Preset 0s
State Saved Yes
Min 0s
Max 1s
3.4.8.5 Limits
Contains parameters for the UWB PHY layer.
Limit Test
Enables or disables limit test.
Remote Command
:CALCulate:HUWB:LIMit:TEST[:STATe] OFF | ON | 0 | 1
:CALCulate:HUWB:LIMit:TEST[:STATe]?
Example
:CALC:HUWB:LIM:TEST ON
Short Range Comms & IoT Mode User's &Programmer's Reference 517