Table Of Contents
Zoom Center 488
Restart 489
3.2.9.2 Sweep Config 491
Sweep Type 491
Sweep Type Rules 493
Sweep Time Rules 494
FFT Width 496
Points 499
Zoom Points 502
IF Dithering 503
Image Protection 504
Abort (Remote Command Only) 505
3.2.10 Trace 506
3.2.10.1 Select Trace 511
3.2.10.2 Trace Control 512
Trace Type 512
Clear and Write | Restart Averaging | Restart Max/Min Hold 517
View/Blank 518
Trace Settings Table 520
Clear All Traces 520
3.2.10.3 Detector 521
Detector 521
Detector Select Auto/Man 528
Detector Auto All Traces 529
Detector Average Preset 529
Detector Sample Preset 529
3.2.10.4 Math 529
Math Function 530
Operand 1 / Operand 2 536
Offset 537
Reference 537
3.2.10.5 Trace Function 537
From Trace 538
To Trace 538
Copy 538
Exchange 539
Preset All Traces 539
Clear All Traces 539
3.2.10.6 Normalize 540
Normalize On/Off 540
Store Reference (Trace1 -> Trace3) 543
Show Reference (Trace 3) 543
Norm Ref Lvl 543
Norm Ref Position 544
Open/Short Cal 544
12 Spectrum Analyzer Mode User's &Programmer's Reference
To Next Page
Loading...
