To Next Page

To Previous Page

4 System

4.9 Diagnostics

“<Cal Signal>,<AC/DC>,<2dB #1 Atten>,<2dB #2 Atten>,<6dB Atten>,<10dB

Atten>,<20dB Atten>,<30dB Atten>,<Fixed Atten>,<Low Noise Path

Switch>,<Presel Bypass>”

Items in the list not pertaining to your hardware configuration return as -999 for those items

Dependencies Not supported by E6607C

4.9.4 Query the Operating Temperature Extremes (Remote Query Only)

Returns the low operating temperature extreme value. The value survives a power-

cycle and is the temperature extreme encountered since the value was reset by the

factory or service center.

Remote

Command

:SYSTem:TEMPerature:LEXTreme?

Example

:SYST:TEMP:LEXT?

Notes Value is in degrees Celsius at which the lowest operating temperature has been recorded since 1st

power-up

State Saved No

Returns the high operating temperature extreme value. The value survives a power-

cycle and is the temperature extreme encountered since the value was reset by the

factory or service center.

Remote

Command

:SYSTem:TEMPerature:HEXTreme?

Example

:SYST:TEMP:HEXT?

Notes Value is in degrees Celsius at which the highest operating temperature has been recorded since 1st

power-up

State Saved No

4.9.5 Query the Elapsed Time since 1

power on (Remote Query Only)

Returns the elapsed on-time in minutes since 1

power-on.

Remote Command

:SYSTem:PON:ETIMe?

Example

:SYST:PON:ETIM?

Notes Query Only

2191 Spectrum Analyzer Mode User's &Programmer's Reference

Keysight N9010B User Reference

Other manuals for Keysight N9010B