10 Hardware-Accelerated Fast Power Measurement (Remote Command Only)
10.4 Configure Fast Power Measurement (Remote Command Only)
10.4 Configure Fast Power Measurement (Remote Command Only)
Begins hardware setup and returns immediately, with no acquisition made. This can
be used in parallel with other hardware operations to effectively hide the hardware
setup time.
Remote Command
:CALCulate:FPOWer:POWer[1,2,…,999]:CONFigure
Example
:CALC:FPOW:POW1:CONF
Notes Option FP2 is required
2846 Spectrum Analyzer Mode User's &Programmer's Reference
To Next Page
Loading...
