To Next Page

To Previous Page

3 Spectrum Analyzer Mode

3.3 Channel Power Measurement

Measure Trace

Specifies which trace’s scalar results are displayed in the Metrics window, and

retrieved by sending a :READ or :FETCh query:

–

Trace 1

–

Trace 2

–

Trace 3

Remote Command

:CALCulate:<meas>:MTRace TRACe1 | TRACe2 | TRACe3

:CALCulate:<meas>:MTRace?

<meas> is the identifier for the current measurement; any one of CHPower | ACPower |

OBWidth | SEMask | SPURious | PVTime

Example Channel Power

:CALC:CHP:MTR TRAC1

:CALC:CHP:MTR?

Dependencies In the ACP measurement, this control is grayed-out when Meas Method is set to RBW or FAST, and

only Trace 1 is enabled

Preset

TRACe1

State Saved No

Range Trace 1 | Trace 2 | Trace 3

712 Spectrum Analyzer Mode User's &Programmer's Reference

Keysight N9010B User Reference

Other manuals for Keysight N9010B