7 Save/Recall/Print
7.3 Save
a machine-readable format only, as follows:
<syst set preamble><state block data>
Where:
<syst set preamble> is the format:
#NMMM
–
N = number of digits that comprise MMM
–
MMM = length in bytes of following data
<state block data> is machine readable state data
Example response: #42016<state data>
The state is recalled by sending the :SYST:SET? response data to the instrument. From example
above::SYST:SET #42016<state data>
Spectrum Analyzer Mode User's &Programmer's Reference 2628
To Next Page
Loading...
