97
Command Reference
Calculate Subsystem
Peak Search Type
:CALCulate:MARKer:PEAK:SEARch:MODE MAXimum|MINi-
mum
:CALCulate:MARKer:PEAK:SEARch:MODE?
Specifies the peak search type. When it is set to maximum,
the places the selected marker on the highest point on the
assigned trace. When it is set to minimum, the places the
selected marker on the lowest point on the assigned trace.
Example: :CALCulate:MARKer:PEAK:SEARch:MODE MINimum
Key access: Shift > Peak
> More > PK Criteria > Peak Type
Peak Threshold
:CALCulate:MARKer:PEAK:THReshold <value>
:CALCulate:MARKer:PEAK:THReshold?
Specifies the minimum signal level for the analyzers internal
peak identification routine to recognize a signal as a peak.
This applies to all traces and all windows.
Preset: –140 dBm
Example: :CALCulate:MARKer:PEAK:THReshold -30 dBm
Key access: Shift > Peak
> More > PK Criterion > Peak Threshold
Peak to Peak Delta Markers
:CALCulate:MARKer[1]|2|3|4|5|6:PTPeak
Positions a pair of delta markers on the highest and lowest
points on the trace.
Example: :CALCulate:MARKer2:PTPeak
Key access: Peak > Pk-Pk Search
To Next Page
Loading...
