Keysight N9322C - Page 106

Command Reference
Calculate Subsystem
98
Marker to Center
:CALCulate:MARKer[1]|2|3|4|5|6[:SET]:CENTer
This command sets the center frequency equal to the
specified marker frequency, which moves the marker to the
center of the screen. In delta marker mode, the center
frequency is set to the marker delta value. This command is
not available in zero span. This command is just available in
Spectrum Analyzer and Tracking Generator mode.
Example: :CALCulate:MARKer1:CENTer
Key access: Marker
> M arker To > To Cent er
Marker to Start Frequency
:CALCulate:MARKer[1]|2|3|4|5|6[:SET]:STARt
Sets the start frequency to the value of the specified marker
frequency. In delta marker mode, the start frequency is set
to the marker delta value. This command is not available in
zero span. This command is just available in Spectrum
Analyzer and Tracking Generator mode.
Example: :CALCulate:MARKer:STARt
Key access: Marker
> M arker To > To St ar t
Marker to Stop Frequency
:CALCulate:MARKer[1]|2|3|4|5|6[:SET]:STOP
Sets the stop frequency to the value of the specified marker
frequency. In delta marker mode, the stop frequency is set
to the marker delta value. This command is not available in
zero span. This command is just available in Spectrum
Analyzer and Tracking Generator mode.
Example: :CALCulate:MARKer:STOP
Key access: Marker
> M arker To > To St op