Keysight N9322C - Power Measurement Subsystem

99
Command Reference
Calculate Subsystem
Marker On/Off
:CALCulate:MARKer[1]|2|3|4|5|6:STATe OFF|ON|0|1
:CALCulate:MARKer[1]|2|3|4|5|6:STATe?
This command toggles the selected marker status between on
and off.
Example: :CALCulate:MARKer1:STATe 0
Key access: Marker
> Mode > Normal/Off
Marker to Trace
:CALCulate:MARKer[1]|2|3|4|5|6:TRACe <integer>
:CALCulate:MARKer[1]|2|3|4|5|6:TRACe?
This command assigns the specified marker to the
designated trace 1, 2, 3 or 4.
Example: :CALCulate:MARKer2:TRACe 2
Key access: Marker
> Marker Trace
Marker X value
:CALCulate:MARKer[1]|2|3|4|5|6:X <para>
:CALCulate:MARKer[1]|2|3|4|5|6:X?
This command positions the designated marker on its
assigned trace at the specified trace X value.
The value is in the X- axis units, which can be a
frequency or time.
The query returns the current X value of the designated
marker.
Example: :CALCulate:MARKer2:X 2000 MHz
Key access: Marker
> Normal
Marker Readout X Value
:CALCulate:MARKer[1]|2|3|4|5|6:X:READout
FREQuency|TIME |PERiod
:CALCulate:MARKer[1]|2|3|4|5|6:X:READout?