Keysight N9322C - Page 108

Command Reference
Calculate Subsystem
100
Toggles the marker X- Axis readout between frequency, time
and period.
Key access: Marker
> More > Read Out
Query Marker Readout: Y Value
:CALCulate:MARKer[1]|2|3|4|5|6:Y?
This command reads the current Y value for the designated
marker or delta on its assigned trace. The value is in the
Y- axis units for the current trace.
This command can be used to read the results of marker
functions such as and noise that are displayed in the marker
value field on the analyzer.
Example: :CALCulate:MARKer1:Y?
Marker Demod Type
:CALCulate:MARKer:DEMod:TYPE AM|FM
:CALCulate:MARKer:DEMod:TYPE?
Toggles the marker demodulation function between
amplitude modulation and frequency modulation.
Key access: Marker
> Mode > Demod Setting > Demod Type
Marker Demod Speaker Volume
:CALCulate:MARKer:DEMod:SVOLume <para>
:CALCulate:MARKer:DEMod:SVOLume?
Sets the speaker volume for the demodulated signal.
Key access: Marker
> Mode > Demod Setting > Speaker Vol
Marker Demod Delay Time
:CALCulate:MARKer:DEMod:DTIMe <para>
:CALCulate:MARKer:DEMod:DTIMe?
Sets the delay time for the marker demodulation.
Key access: Marker
> Mode > Demod Setting > Delay Time