Command Reference
Reflection Measurement Option Subsystem
142
Reflection Measurement Marker Continuous Peak State
:CALCulate:MARKer[1]|2|3|4|5|6:CPEak OFF|ON|0|1
:CALCulate:MARKer[1]|2|3|4|5|6:CPEak?
This command turns on/off marker continuous peak state in
reflection measurement.
Example: :CALCulate:MARKer1:CPEak ON
Key access: Marker > Cont Peak
Reflection Measurement Marker Continuous Valley State
:CALCulate:MARKer[1]|2|3|4|5|6:CVALley
OFF|ON|0|1
:CALCulate:MARKer[1]|2|3|4|5|6:CVALley?
This command turns on/off marker continuous valley state
in reflection measurement.
Example: :CALCulate:MARKer1:CVALley ON
Key access: Marker > Cont Valley
Reflection Measurement Set Marker X axis Value
:CALCulate:MARKer[1]|2|3|4|5|6:X <value>
:CALCulate:MARKer[1]|2|3|4|5|6:X?
This command sets current Marker X axis value.
Range: current frequency range or distance range
Example: :CALCulate:MARKer1:X 3500000000
Key access: Marker > Normal, then input the value with the numeric keys and soft
keys
Query Marker Y axis Value in Reflection Measurement
:CALCulate:MARKer[1]|2|3|4|5|6:Y?
Use this command to query current Marker Y axis value
readout.
Example: :CALCulate:MARKer1:Y?
To Next Page
Loading...
Need help?
General
