Command Reference
Reflection Measurement Option Subsystem
146
Define Limit Value in Reflection Measurement
:CALCulate:LLINe[1]|2:DATA
<x-axis>,<ampl>,<connected>{,<x-axis>,<ampl>,<co
nnected>}
:CALCulate:LLINe[1]|2:DATA?
This command defines the limit value in reflection
measurement.
Example: :CALC:LLIN1:DATA
1000000000,-20,0,200000000,-30,1
Key access: Shift > Limit > Limit1 > Edit Limits
To Next Page
Loading...
