Keysight N9322C - Page 166

Command Reference
Channel Scanner Option Subsystem
158
Example: :CHSCanner:EDIT:BOTTom:CUSTom
10000000,1000000,10000,100
Key access: Meas > Range Edit > Edit Method Custom
Set Start Frequency For Custom Scan Channel For Bottom N
Sweep
:CHSCanner:EDIT:BOTTom:CUSTom:STARt <value>
:CHSCanner:EDIT:BOTTom:CUSTom:STARt?
This command specify the start frequency of custom scan
channels for Bottom N sweep mode.
Example: :CHSCanner:EDIT:BOTTom:CUSTom:STARt 20000000
Key access: Meas > Range Edit > Edit Method Custom, then > Start Freq
Set Frequency Step for Customer Scan Channel For Bottom
N Sweep
:CHSCanner:EDIT:BOTTom:CUSTom:STEP <value>
:CHSCanner:EDIT:BOTTom:CUSTom:STEP?
This command specify the frequency step size of custom
scan channels for Bottom N sweep mode.
Example: :CHSCanner:EDIT:BOTTom:CUSTom:STEP 2000000
Key access: Meas > Range Edit > Edit Method Custom, then > Freq Step Size
Set Bandwidth For Custom Scan Channel For Bottom N
Sweep
:CHSCanner:EDIT:BOTTom:CUSTom:BANDwidth <value>
:CHSCanner:EDIT:BOTTom:CUSTom:BANDwidth?
This command specify the bandwidth of custom scan
channels for Bottom N sweep mode.
Example: :CHSCanner:EDIT:BOTTom:CUSTom:BANDwidth 30000
Key access: Meas > Range Edit > Edit Method Custom, then > Bandwidth