165
Command Reference
Demodulation Option Subsystem
Preamp
[:SENSe]:POWer[:RF]:GAIN[:STATe] OFF|ON|0|1
[:SENSe]:POWer[:RF]:GAIN[:STATe]?
Use this command to turn on/off preamplifier in
demodulation mode.
Example: :POWer:GAIN ON
Key access: Amptd > Preamp
Single Sweep
:INITiate[:IMMediate]
Use this command to perform a single sweep (measurement).
Example: :INITiate
Key access: Shift > Sweep > Single
Sweep State
:INITiate:CONTinuous OFF|ON|0|1
:INITiate:CONTinuous?
This command toggles the sweep state between single sweep
and continuous sweep.
Example: :INITiate:CONTinuous 1
Key access: Shift > Sweep > Sweep
External Gain
[:SENSe]:CORRection:OFFSet[:MAGNitude] <dB>
[:SENSe]:CORRection:OFFSet[:MAGNitude]?
This command sets the external gain.
Range: 0 to 51 dB
Example: :CORRection:OFFSet 20
Key access: Amptd > External Gain
To Next Page
Loading...
