Keysight N9322C - Page 175

167
Command Reference
Demodulation Option Subsystem
Read Current AM Modulation Rate
:CALCulate:AMA:MRATe?
Use this command to query the AM Modulation rate result.
Example: :CALCulate:AMA:MRATe?
AM Average Count
[:SENSe]:AMA:AVERage:COUNt <integer>
[:SENSe]:AMA:AVERage:COUNt?
Use this command to set average count number in AM or
FM demodulation analysis.
Example: :AMA:AVERage:COUNt 50
[:SENSe]:AMA:AVERage OFF|ON|1|0
[:SENSe]:AMA:AVERage?
Use this command to turn on/off average state in AM or FM
demodulation analysis.
Example: :AMA:AVERage 1
Key access: Meas > Average Number
AM Detector
[:SENSe]:AMA:DEMod:DETector[:FUNCtion]
PPK|NPK|PNPK|RMS
[:SENSe]:AMA:DEMod:DETector[:FUNCtion]?
Use this command to switch the detector type in AM
demodulation analysis.
Range: PPK, NPK, PNPK, RMS
Example: :AMA:DEMod:DETector PPK
Key access: Meas > Detector