Keysight N9322C - Page 176

Command Reference
Demodulation Option Subsystem
168
AM Detector PeakHold
[:SENSe]:AMA:DEMod:DETector[:FUNCtion]:PEAKhold
OFF|ON|0|1
[:SENSe]:AMA:DEMod:DETector[:FUNCtion]:PEAKhold?
Use this command to turn on/off Peak hold state of AM
detector.
Example: :AMA:DEMod:DETector:PEAKhold ON
Key access: Meas > Detector > PeakHold
AM IF Bandwidth
[:SENSe]:AMA:IFBWidth
1.2MHz|960kHz|600kHz|480kHz|300kHz|240kHz|120kHz
|96kHz|60kHz
[:SENSe]:AMA:IFBWidth?
This command sets the IF bandwidth of AM demodulation
analysis.
Range: 1.2 MHz, 960 kHz, 600 kHz, 480 kHz, 300 kHz, 240 kHz, 120
kHz, 96 kHz, 60 kHz
Example: :AMA:IFBWidth 96kHz
Key access: Meas > IFBW
AM IF Bandwidth
[:SENSe]:AMA:IFBWidth:AUTO OFF|ON|0|1
Use this command to turn on/off the IF bandwidth auto
state in AM demodulation mode.
Example: :AMA:IFBWidth:AUTO ON
Key access: Meas > IFBW Auto/Man