177
Command Reference
Demodulation Option Subsystem
FM Frequency Deviation Upper Limit
:CALCulate:FM:LIMit:FDUL:UPPer <freq>
:CALCulate:FM:LIMit:FDUL:UPPer?
Use this command to specify frequency deviation upper limit
of FM demodulation analysis.
Range: 1 Hz to 500 kHz
Example: :CALCulate:FM:LIMit:FDUL:UPPer 2kHz
Key access: Shift > Limit > FreqDev Upper
FM frequency Deviation Lower Limit
:CALCulate:FM:LIMit:FDLL:LOWer <freq>
:CALCulate:FM:LIMit:FDLL:LOWer?
Use this command to specify frequency deviation lower limit
of FM demodulation analysis.
Range: 1 Hz to 500 kHz
Example: :DANalyse:FM:LIMit:FDLL:LOWer 3kHz
Key access: Shift > Limit > FreqDev Lower
FM Carrier Frequency Offset Upper Limit
:CALCulate:AMA:LIMit:FOFFset:UPPer <freq>
:CALCulate:AMA:LIMit:FOFFset:UPPer?
Use this command to specify FM carrier frequency offset
upper limit of FM demodulation analysis.
Range: –1 to 1 MHz
Example: :CALCulate:AMA:LIMit:FOFFset:UPPer 0
Key access: Shift > Limit > CarrFreqOfstUp