Keysight N9322C - Page 187

179
Command Reference
Demodulation Option Subsystem
FM X Scale Coupling State
:DISPlay:AMA:VIEW:WINDow:TRACe:X[:SCALe]:COUPle
0|1|OFF|ON
:DISPlay:AMA:VIEW:WINDow:TRACe:X[:SCALe]:COUPle?
Use this command to turn on/off scale coupling state of X
axis.
Example: :DISPlay:AMA:VIEW:WINDow:TRACe:X:COUPle ON
Key access: Shift > X Scale > Scale Coupling
FM Y Reference Value
:DISPlay:FM:VIEW:WINDow:TRACe:Y[:SCALe]:RVALue
<freq >
:DISPlay:FM:VIEW:WINDow:TRACe:Y[:SCALe]:RVALue?
Use this command to specify reference value of Y axis.
Range: –1 to 1 MHz
Example: :DISPlay:FM:VIEW:WINDow:TRACe:Y:RVALue 10kHz
Key access: Shift > Disp > Y Scale > Ref Value.
FM Y Scale/DIV
:DISPlay:FM:VIEW:WINDow:TRACe:Y[:SCALe]:PDIVi-
sion <freq >
:DISPlay:FM:VIEW:WINDow:TRACe:Y[:SCALe]:PDIVi-
sion?
Use this command to specify scale per division of Y axis.
Range: 1 Hz to 100 kHz
Example: :DISPlay:FM:VIEW:WINDow:TRACe:Y:PDIVision 20kHz
Key access: Shift > Disp > Y Scale > Ref Value