Command Reference
Demodulation Option Subsystem
184
ASK External Trigger Type
:TRIGger:DMA[:SEQuence]:EXTernal:SLOPe POSi-
tive|NEGative
:TRIGger:DMA[:SEQuence]:EXTernal:SLOPe?
This command switch external trigger type between rise
slope and fall slope. It’s only available for external trigger.
Range: POSitive, NEGative
Example: :TRIGger:DMA:EXTernal:SLOPe NEGative
Key access: Meas > Trigger >External > Trigger Slope
ASK Trigger Delay Time
:TRIGger:DMA[:SEQuence]:DELay <time>
:TRIGger:DMA[:SEQuence]:DELay?
Use this command to specify trigger delay time.
Range: 0 to 200 s
Example: :TRIGger:DMA:DELay 2us
:TRIGger:DMA[:SEQuence]:DELay:STATe OFF|ON|0|1
:TRIGger:DMA[:SEQuence]:DELay:STATe?
Use this command to turn on/off trigger delay state.
Example: :TRIGger:DMA:DELay:STATe ON
Key access: Meas > Trigger > External > Trig Delay
ASK Limit State
:CALCulate:DMA:LIMit OFF|ON|0|1
:CALCulate:DMA:LIMit?
Use this command to turn on/off limit state in ASK
demodulation analysis.
Example: :CALCulate:DMA:LIMit ON
Key access: Shift > Limit > Limit
To Next Page
Loading...
