Keysight N9322C - Page 214

Command Reference
Power Meter Option Subsystem
206
Set Display Auto Range State
:DISPlay[:WINDow]:DISPrange:AUTO OFF|ON|0|1
:DISPlay[:WINDow]:DISPrange:AUTO?
This command turns on/off the display auto range state.
Example: :DISPlay:WINDow:DISPrange:AUTO 1
Key access: Meas > Meas Disp > Disp Range > Auto Range
Set Top Value of Display Range
:DISPlay[:WINDow]:DISPrange:TOP <value>
:DISPlay[:WINDow]:DISPrange:TOP?
This command specify the top value of display range.
Range: –199.99 to +200 dBm
Example: :DISPlay:WINDow:DISPrange:TOP 10dBm
Key access: Meas > Meas Disp > Disp Range > Top
Set Bottom Value of Display Range
:DISPlay[:WINDow]:DISPrange:BOTTom <value>
:DISPlay[:WINDow]:DISPrange:BOTTom?
This command defines the bottom value of display range
Range: –200 to +199.99 dBm
Example: :DISPlay:WINDow:DISPrange:BOTTom –20dBm
Key access: Meas > Meas Disp > Disp Range > Bottom
Display Mode
:DISPlay[:WINDow]:MODE METer|CHARt|TRACe
:DISPlay[:WINDow]:MODE?
This command to toggle display mode between meter, chart
and trace.
Example: :DISPlay:WINDow:MODE CHARt
Key access: Meas > Meas Disp > Disp Mode