Keysight N9322C - Page 66

Command Reference
System Subsystem
58
Probe Power
:SYSTem:PORT:PROBe OFF|ON|0|1
:SYSTem:PORT:PROBe?
This command turns on/off the probe power port on the top
panel.
Key access: System > More > Port Setting > Probe Power
IP Config Host Name
:SYSTem:PORT:IP:HNAMe <"string">
:SYSTem:PORT:IP:HNAMe?
Sets a host name for the analyzer in network.
Key access: System > More > Port Setting > IP Admin > Sys Name
IP Address
:SYSTem:PORT:IP:ADDRess <“xxx.xxx.xxx.xxx”>
:SYSTem:PORT:IP:ADDRess?
Sets a host name for the analyzer in network.
Example: :SYSTem:PORT:IP:ADDRess "192.168.0.113"
Key access: System > More > Port Setting > IP Admin >IP Address
IP Address Assignment
:SYSTem:PORT:IP:ADDRess:TYPE STATIC|DHCP
:SYSTem:PORT:IP:ADDRess:TYPE?
Toggles the IP assignment setting between static (manual)
and DHCP (dynamic assignment) mode.
Key access: System > More > Port Setting > IP Admin > IP Address