Keysight N9322C - Page 68

Command Reference
System Subsystem
60
System Preset
:SYSTem:PRESet
Use this command to preset the instrument. The preset type
is based on the setting of Preset Type: DFT, User or Last.
Key access: Preset
Factory Default
:SYSTem:FDEFault
Set both the measure and setting parameters to factory
preset parameters.
Key access: System > More > Factory Default
Timed Power On
:SYSTem:TIMed:PON:STATe OFF|ON|0|1
:SYSTem:TIMed:PON:STATe?
Use this command turn on/off the timed power- on function.
The analyzer will be turned on in a user- defined time.
Example: :SYSTem:TIMed:PON:STATe ON
Key access: Shift > System > Pwr On/Off Preset > Time Pwr On > Power On
On/Off
Timed Power On Repeat Mode
:SYSTem:TIMed:PON:MODE ONCE|EVERYDAY
:SYSTem:TIMed:PON:MODE?
Timed powers on the analyzer just once or repeat everyday.
Example: :SYSTem:TIMed:PON:MODE ONCE
Key access: Shift > System > Pwr On/Off Preset > Time Pwr On > Repeat Mode