61
Command Reference
System Subsystem
Time Power On Time
:SYSTem:TIMed:PON:TIME <“HHMMSS”>
:SYSTem:TIMed:PON:TIME?
Sets the power on time, then the analyzer will be turned on
automatically.
Example: :SYSTem:TIMed:PON:TIME “122332”
Key access: Shift > System > Pwr On/Off Preset > Time Pwr On > Time
Time Power On Date
:SYSTem:TIMed:PON:DATE <“YYYMMDD”>
:SYSTem:TIMed:PON:DATE?
Sets the power on date. This commmand is only available
when the repeat mode is set to once.
Example: :SYSTem:TIMed:PON:DATE “20120922”
Key access: Shift > System > Pwr On/Off Preset > Time Pwr On > Date
Timed Power Off State
:SYSTem:TIMed:POFF:STATE OFF|ON|0|1
:SYSTem:TIMed:POFF:STATE?
This command turns on/off timed power off status of
instrument.
Key access: Shift > System > Pwr On/Off Preset > Time Pwr Off > Power Off
Timed Power Off Repeat Mode
:SYSTem:TIMed:POFF:MODE ONCE|EVERYDAY
:SYSTem:TIMed:POFF:MODE?
Use this command to toggle timed power off mode between
once and everyday in a user- defined time
Key access: Shift > System > Pwr On/Off Preset > Time Pwr Off > Repeat Mode
Once/Everyday
To Next Page
Loading...
