Keysight N9322C - Page 84

Command Reference
Sense Subsystem
76
Input Port Preamplifer
[:SENSe]:POWer[:RF]:GAIN[:STATe] OFF|ON|0|1
[:SENSe]:POWer[:RF]:GAIN[:STATe]?
Turns the internal preamp on/off.
*RST: Off
Remarks: This command is only available when PA7 option is
installed.
Example: :POWer:GAIN ON
Key access: AMPTD >
Preamp On/Off
Scale/DIV
:DISPlay:WINDow:TRACe:Y[:SCALe]:PDIVision
DIV1|DIV2|DIV5|DIV10
:DISPlay:WINDow:TRACe:Y[:SCALe]:PDIVision?
This command sets the per- division display scaling for the
y- axis when scale type of Y axis is set to Log.
*RST: 10 dB
Range: 1, 2, 5 or 10
Example: :DISPlay:WINDow:TRACe:Y:PDIVision DIV5
Key access: Amptd > Scale/DIV
Scale Type
:DISPlay:WINDow:TRACe:Y[:SCALe]:SPACing LIN-
ear|LOGarithmic
:DISPlay:WINDow:TRACe:Y[:SCALe]:SPACing?
Toggles the vertical graticule divisions between logarithmic
unit and linear unit. The default logarithmic unit is dBm,
and the linear unit is mV.
*RST: Log
Example: :DISPlay:WINDow:TRACe:Y:SPACing LINear
Key access: Amptd > Scale Type > Log/Lin