77
Command Reference
Sense Subsystem
Power Units of Measure ( Y Axis Unit )
:UNIT:POWer DBM|DBMV|DBMVEMF|DBUV|DBU-
VEMF|V|W|VEMF
:UNIT:POWer?
Specifies amplitude units for the input, output and display.
*RST: dBm in log amplitude scale
Volts in linear amplitude scale
Example: :UNIT:POWer DBMV
Key access: Amptd > Y Axis Unit
Hi-Sensitive
[:SENSe]:POWer[:RF]:HSENsitive[:STATe] OFF|ON|0|1
[:SENSe]:POWer[:RF]:HSENsitive [:STATe]?
Toggles the Hi- sensitive function between on and off.
Key access: AMPTD >
More > Hi-sensitivity
Reference Offset Level
:DISPlay:WINDow:TRACe:Y[:SCALe]:RLEVel:OFFSet
<value>
:DISPlay:WINDow:TRACe:Y[:SCALe]:RLEVel:OFFSet?
This command sets the amplitude offset level for the Y- Axis.
*RST: 0 dB
Range: –327.60 to +327.60 dB
Example: :DISPlay:WINDow:TRACe:Y:RLEVel:OFFSet 20dB
Key access: Amptd > More > Ref Offset
Correction Off
[:SENSe]:CORRection:OFF
Turn off the amplitude correction function off.
Key access: Amptd > More > Amp Correction > Off
To Next Page
Loading...
