Keysight NFA Series User Manual

Chapter 2 25
Test Descriptions
Input VSWR
3.5mm Calibration Kit
Impedance: 50
Ω
Frequency Band: 10 MHz to
3 GHz
UUT: N8974A and N8975A
85033D
3.5mm Calibration Kit
Impedance: 50
Ω
Frequency Band: 3 GHz to
26.5 GHz
UUT: N8974A and N8975A
85052D
Cable 50 N Type (M to M)
Frequency Band: 3 GHz to
26.5 GHz
11500C
Adapter 50 N Type (F) to 7 mm
(included in 85032B N Type
Calibration Kit)
85054-60001
Adapter 2.4 mm (M) to 3.5 mm
Precision (F)
1250-1745
Adaptor 2.4 mm (M) to 3.5 mm
Precision (F)
11901C
UWave Cable 2.4 mm (M) to 2.4 mm (M),
81 cm (32 in.)
Frequency band: 3 GHz to
26.5 GHz
85133C
a. Option 004 is only required for the ET models.
b. Option 004 is only required for the ET models.
c. Part 1 of this procedure lists hard and soft keys for the 8753ET. Other network analyzers such
as the 8753D or E may have different hard and soft key labelling. Please refer to the
appropriate Users Guide for the relevant menu maps.
Table 2-6 Test Equipment required for Input VSWR test
Equipment description Critical specification for
equipment substitution
Recommended model

Keysight NFA Series Specifications

General

Brand	Keysight
Model	NFA Series
Category	Measuring Instruments
Language	English