Keysight U1610A User Guide

3 Using the Oscilloscope
50 Keysight U1610/20A User’s Guide
Adjust the horizontal scale factor (time/div)
You can increase or decrease the horizontal scale factor or sweep speed of a
waveform by pressing .
Set the waveform delay
The delay setting sets the specific location of the trigger event with respect to the
time reference position.
You can move the delay time indicator ( ) by pressing .
Negative delay values indicate that you are looking at a portion of the waveform
before the trigger event, and positive values indicate that you are looking at the
waveform after the trigger event.
Horizontal scale factor
Delay/time offset

Keysight U1610A Specifications

General

Brand	Keysight
Model	U1610A
Category	Test Equipment
Language	English