6 Keysight U1610/20A User’s Guide
– If the instrument is used in a manner not specified by the manufacturer,
the instrument protection may be impaired.
– Always use a dry cloth to clean the instrument. Do not use ethyl alcohol
or any other volatile liquid.
– It is recommended to use the instrument under ventilated conditions and
in the upright position to ensure adequate airflow at the rear.
– Always cover the DC power inlet and the USB port by closing the lid when
not in used.
Electrostatic discharge (ESD) can result in damage to the components in the
instrument and accessories. To prevent electrostatic discharge (ESD):
– Select a static-free work location when installing and removing sensitive
equipment.
– Handle sensitive components to the minimum extent possible. Do not
allow contacts between components and exposed connector pins.
– Transport and store in ESD preventive bags or containers that protect
sensitive components from static electricity.
– The battery (optional) must be properly recycled or disposed.
To Next Page
Loading...
Need help?
General
