Keysight U8903B - Figure 5-2 Unit ID Text Box; Figure 5-3 U8903 B-BT Tester Connection Status; Figure 5-4 U8903 B-BT Tester Bluetooth Address

5 Performance Verification for Bluetooth Card
86 Keysight U8903B Service Guide
2 Click Run on the VEE test program to start the test.
3 Key in the DUT serial number at the Unit ID text box as shown in Figure 5-2.
Figure 5-2 Unit ID text box
4 Click Connect Instruments to establish the connection between the U8903B Tester
unit and the DUT. A green box on the U8903B-BT Tester will appear as shown in
Figure 5-3 if the U8903B Tester unit is detected and is able to communicate on the
GPIB bus.
Figure 5-3 U8903B-BT Tester connection status
5 If the U8903B Tester unit connection is successful, the U8903B Tester BT Addr dialog
box will display the U8903B Tester unit’s Bluetooth address as shown below.
Figure 5-4 U8903B-BT Tester Bluetooth address
6 Click Select DUT to display the details of the DUT’s hardware and software information
as shown in Figure 5-5.