Keysight U8903B - Figure 5-5 DUT Hardware and Software Information; Figure 5-6 DUT Bluetooth Address; Figure 5-7 U8903 B Tester Unit to the DUT Connection Reminder Window

Performance Verification for Bluetooth Card 5
Keysight U8903B Service Guide 87
Figure 5-5 DUT hardware and software information
7 Click OK to close the DUT information window.
8 The DUT BT Addr window should display the DUT’s Bluetooth address as shown below.
Figure 5-6 DUT Bluetooth address
9 Select the checkbox for every test in the VEE test program to run a full test.
10 Click Run Selected Test to begin the testing procedure.
11 A pop-up window will appear as a reminder to properly connect the U8903B Tester unit
to the DUT as shown in Figure 5-7.
Figure 5-7 U8903B Tester unit to the DUT connection reminder window
12 Click OK on the message box to continue the test.
13 The test progress will be shown on the main log window to the right with the details for
each test point. For failed tests, the Failures log window will show the details of the
failed test results.
14 The test results are saved in the C:\U8903B-BT\Result\ folder. The result for each test
point is stored in a folder with the folder name starting with the DUT's serial number.