Keysight x-series Getting Started Guide

37
Keysight X-Series EMI Receiver
MXE EMI Receiver N9038B
Getting Started Guide
4 Instrument Operating System
This chapter describes the Microsoft Windows 10, configuration and the
settings used with the Keysight instrument software. It includes information
about changing some of the system settings. And it describes the Windows
operating system configuration and the software installations that are present
on the Disk Drive when the instrument leaves the factory.
It is possible to use the front panel and touchscreen for changing operating
system configuration items, but it is easier to perform these tasks with a USB
mouse and external keyboard.
The following topics can be found in this chapter:
“Microsoft Windows” on page 38
“Installed Software ” on page 38
“User installation of software” on page 39
“User Accounts” on page 40
“Keysight X-Series EMI Receiver Licensing Options” on page 42
“Licensing New Measurement Application Software - After Initial Purchase”
on page 45
“Windows Configuration” on page 47
“Configuring Printers” on page 50
“Configuring LAN” on page 51
“Windows Security” on page 53
“System Maintenance” on page 55
“USB Connections” on page 56
“Disk Drive Partitioning and Use” on page 57
“Disk Drive Recovery Process” on page 61

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)