76 X-Series EMI Receiver Getting Started Guide
Using Windows Tools
Embedded Web Server: Using the X-Series EMI Receiver Remotely
Controlling the Instrument
Selecting this tab enables you to view, control and interact with the instrument
through the web server.
Table 5-9 Selecting the Control Instrument tab
Step Notes
1. Select
Control Instrument
A password entry dialog appears.
By default, this password is set at the factory as “keysight”.
However, you may subsequently change the password.
(Select
System, I/O Config, Web Password
Reset on the instrument front panel to change the
password.)
When the correct password has been entered, the Control
Instrument web page appears.
2. You can now enter new settings
as required.
To Next Page
Loading...
