48 X-Series EMI Receiver Getting Started Guide
Instrument Operating System
Windows Configuration
Settings that must not be changed
Avoid changing the settings described below (available from the Windows
Control Panel). Changes to these settings may degrade instrument
performance, screen displays, and measurement speed.
In addition, do not:
If you click on “Advanced System Settings” a dialog will open called
“System Properties.” On this dialog there is an “Advanced” tab, which
opens up a dialog with a number of settings options. One of these is
“Performance”, and if you click on the “Settings” button under
“Performance”, you will see another dialog with a number of settings
options. The default is “Let Windows choose what’s best for my
computer.” You can also select “Adjust for best performance.”
You should leave the remaining selections unchanged.
You May Use This Feature: To Do This…
Do NOT Use This Feature: To Do This…
Do not change Power Options.
If you click on “Advanced System Settings” a dialog will open called “System
Properties.”
On this dialog there is a tab called “Hardware.” You should not modify any
settings under the “Hardware” tab.
On this dialog there is also a tab called “Advanced.” You should not modify any
settings under the “Advanced” tab except as described above under “Settings
that can be changed”.
Do not remove installed Fonts
Do not change the following Display Settings:
— Screen Saver settings (under “Personalization)
— Screen resolution (under “Adjust Resolution”)
— DPI setting (under “Set custom text size”)
Do not change any settings under “Region and Language” or the instrument
keyboard and display may not operate properly
Do not delete or modify the "KeysightOnly" user account.
To Next Page
Loading...
Need help?
General
