Keysight x-series - Page 73

X-Series EMI Receiver Getting Started Guide 73
Using Windows Tools
Remote Desktop: Using the X-Series EMI Receiver Remotely
Ending a Remote Desktop session
There are two ways to disconnect the remote computer from the instrument:
ending the session:
Table 5-7 Ending a session
Step Notes
1. Click the
X, then click OK.
For full-screen, the X appears at the top center of
the window.
For non full-screen, the X appears in a red box at
the right of the window’s title bar.
or
2. When the remote desktop is full
screen, move the cursor to the
bottom left of the window:
— Click
Start, Disconnect.
— Click
Disconnect.
You are asked to confirm that you want to
disconnect.